2-50 DS10 Console Reference
2.19.17 tt_allow_login
Enables or disables login to the SRM console firmware on
alternate console ports. If the environment variable console is set
to serial, the primary console device is the terminal connected
through the COM1 port. The command set tt_allow_login 1 enables
logins through either the COM2 port or a graphics monitor.
Syntax: set tt_allow_login
value
where
value
can be:
(default) 1
Enables login through the COM2 port or a graphics monitor.
0
Disables login through the COM2 port or a graphics monitor.