Index-7
auto_action, 2-35, 2-37
boot_osflags, 2-35, 2-38, 2-39
boot_osflags, DIGITAL UNIX, 2-
38
boot_osflags, OpenVMS, 2-38
bootdef_dev, 2-35
com*_baud, 2-35, 2-40
commands for displaying the value
or setting, 2-28
commands for modifying, 2-28
commands for setting, 2-28
commands for using, 2-28
console, 2-35, 2-40
cpu_enabled, 2-35, 2-41
ew*0_mode, 2-35, 2-41
ew*0_protocols, 2-35, 2-41
kbd_hardware_type, 2-35, 2-42
language, 2-35, 2-43
ocp_text, 2-36
os_type, 1-21, 2-44, 3-31
pci_parity, 2-36, 2-44, 2-45
pk*0_fast, 2-36, 2-45
pk*0_host_id, 2-36, 2-46
pk*0_soft_term, 2-36, 2-46
tt_allow_login, 2-36, 2-47
SRM firmware
enabling and disabling login to, 2-
47
Standard CMOS setup screen,
AlphaBIOS, 3-28
start command, SRM
using in secure mode, 2-22
Starting AlphaBIOS, 3-2
status command (RMC), 4-8, 4-38
stop command, SRM, 2-4, 2-25
Syntax
SRM console commands, 2-5
System board configuration screen,
AlphaBIOS, 3-8
System configuration
displaying in AlphaBIOS console,
3-6
displaying in SRM console, 2-8
System crash dump, 2-27
System failure, specifying console
action, SRM, 2-37
T
Terminal setup (RMC), 4-3
test command, SRM, 2-4, 2-19
Testing the system (all operating
systems), 2-19
Time, setting in AlphaBIOS console,
3-29
Troubleshooting
RMC, 4-19
Tru64 UNIX
booting, 1-6
from local disk, 1-6
from remote disk, 1-8
console for, 2-1
installing, 1-10
specifying as default operating
system, 2-47
tt_allow_login environment variable,
SRM, 2-39, 2-50
U
update command, LFU, 1-27, 1-31, 1-
37, 1-40, 1-41, 1-43
Updating firmware
AlphaBIOS console, 3-19
from AlphaBIOS console, 1-26
from SRM console, 1-26
SRM console, 2-28
Utility programs, 3-44
running from serial terminal, 3-46
V
verify command, LFU, 1-41, 1-43
Version selection, Windows NT, 3-34
W
Windows NT
auto start, 3-38
booting, 1-20
To Next Page
Loading...
Need help?
General
