Index-2
Command conventions, RMC, 4-22
Command syntax, SRM console, 2-5
Configuring parameters, AlphaBIOS
console, 3-28
Console
AlphaBIOS, 1-5
specifying, 3-31
SRM, 1-5
switching from AlphaBIOS to
SRM, 3-42
switching from SRM to
AlphaBIOS, 2-37
Console commands, SRM, 2-3
Console environment variable, SRM,
2-31, 2-32, 2-38, 2-44
Console terminal
specifying type, 2-44
continue command, SRM, 2-3
using in secure mode, 2-25
cpu_enabled environment variable,
SRM, 2-38
crash command, SRM, 2-3, 2-30
Crash dump, 2-30
D
Date, setting in AlphaBIOS console,
3-29
deposit command, SRM, 2-3, 2-33
Depositing data, 2-33
Device naming conventions, SRM, 2-
11
Dial-in configuration, 4-12
Dialing in, 4-17
Dial-out alerts, 4-14
disable alert command (RMC), 4-23
disable remote command (RMC), 4-24
display command, LFU, 1-41
Display system configuration screen,
AlphaBIOS console, 3-6
Displaying system configuration, 2-8
AlphaBIOS console, 3-6
Displaying the value or setting of an
environment variable, 2-32
E
edit command, SRM, 2-3, 2-33
enable alert command (RMC), 4-24
enable remote command (RMC), 4-25
Environment variables, SRM, 2-31
auto_action, 1-5
boot_file, 1-7, 1-9, 1-13, 1-15, 1-17,
2-25
boot_flags, 2-25
boot_osflags, 1-7, 1-9, 1-13, 1-15,
1-17
boot_reset, 1-13
bootdef_dev, 1-7, 1-9, 1-13, 1-15,
1-17, 2-25
displaying the value or setting, 2-32
modifying, 2-31
os_type, 1-5
password, 2-26
setting, 2-31
summary, 2-38
Escape sequence (RMC), 4-6
Ethernet, specifying controller type, 2-
45
ew*0_mode environment variable,
SRM, 2-38, 2-45
ew*0_protocols environment variable,
SRM, 2-38, 2-45
examine command, SRM, 2-3, 2-33
Examing data, 2-33
exit command, LFU, 1-27, 1-31, 1-37,
1-40, 1-41
F
Finding help
AlphaBIOS console, 3-4
SRM console, 2-36
Firmware
updating, 1-27
updating from AlphaBIOS, 3-19
updating from CD-ROM, 1-28
updating from floppy disk, 1-32, 1-
34
updating from network device, 1-38
To Next Page
Loading...
