Compaq ALPHASERVER DS10 Reference Guide

Remote Management Console 4-3
4.2 Terminal Setup
Remote connection is made through a modem connected to the
COM1 port. To set up the modem, you first use a local terminal
on the COM1 port to set up the parameters of the modem and
RMC connection. You then disconnect the terminal and connect
the modem.
Figure 4–2 Setups for RMC Mode
PK1051
1
2
A
B
1
VT
You can connect a terminal or a modem to the COM1 port, but not both at the
same time. You use the terminal to set RMC parameters for the connection,
then connect the modem. See Section 4.9.

Compaq ALPHASERVER DS10 Specifications

General

Brand	Compaq
Model	ALPHASERVER DS10
Category	Music Mixer
Language	English