3-30 DS10 Console Reference
Figure 3–21 Advanced CMOS Setup Screen
CMOS Setup F1
Advanced CMOS Setup F1
➊ PCI Parity Checking:
Disabled
➋ Power-up Memory Test:
Full
➌ AlphaBIOS Password Option:
Disabled
➍ Console Selection:
Windows NT Console
(AlphaBIOS)
¹
➎ Warm Reboot:
Enabled
Press
º
or
¹
to to enable or disable detection of PCI bus parity error.
Some non-compliant PCI option boards do not work properly with PCI parity
checking enabled.
➏
ESC = Discard Changes F10 = Save Changes
To Enter Advanced CMOS Setup
1.
Start AlphaBIOS, select CMOS Setup, and press Enter.
2.
In the Standard CMOS Setup screen, press F6.