AlphaBIOS Console 3-25
To delete a partition
1.
Start AlphaBIOS and select Hard Disk Setup. Press Enter.
2.
Select the partition to be deleted (see
➊ in Figure 3–17).
3.
Press Delete. A dialog box is displayed (see
➋).
4.
Press F10 to confirm the deletion.
Figure 3–17 Delete Partition Dialog Box
Hard Disk Setup
Disk 0 QLISP1040 #0, SCSI ID 3 510 MB
Partition 1
200
MB NTFS
➊
Partition 2
200
MB FAT
Unused
100
MB
Disk 1 NCRC810 #0, SCSI ID 5 1001 MB
Partition 1
995
MB NTFS
Parti
Delete Disk 0, Partition 2
FAT
The delete operation will destroy all
data on partition 2 of Disk 0. ➋
Press F10 to continue. Press ESC to
Cancel.
F10 =Continue ES C =Cancel