3-38 DS10 Console Reference
3.9.2 Primary Operating System and the Auto Start Option
The process of setting up your operating system selections is
similar to using an editor. You can make changes to your
operating system selections and then either save your changes
or exit without saving.
Figure 3–25 Operating System Selection Setup
Operating System Selection Setup
Windows NT Server 4.0
Primary Operating System
Boot Name: Windows NT Server 4.0
Boot File: Disk 0, Partition 2 \os\winnt400\osloader.exe
OS Path: Disk 0, Partition 1 \WINNT400
OS Options:
INSERT=New F6=Edit F8=Primary ESC=Discard Changes
DEL=Delete F7=Copy F9=Validate F10=Save Changes
PK-0737C-97
6
2
1
4
5
3
AlphaBIOS boots Windows NT in two stages. The first stage involves reading
an OS Loader program from a disk. The OS Loader program is named
OSLOADER.EXE. The selection for the operating system must describe the
path where AlphaBIOS will find the OS Loader program. The OS Loader
program must be located on a partition formatted with the FAT file system.
Once the OS Loader program executes, it uses the services provided by
AlphaBIOS to load the operating system components. After the operating
system is loaded, the OS Loader starts execution of the operating system.
To Next Page
Loading...
Need help?
General
