Compaq ALPHASERVER DS10 Reference Guide

SRM Console 2-3
2.2 Commands
This section presents a command summary (Table 2–1), Gives
the syntax for the console commands (Table 2–2), and explains
the special keystrokes and characters available in SRM console
mode (Table 2–3).
2.2.1 Command Summary
Table 2–1 Summary of SRM Console Commands
Command Function
alphabios
Loads and starts the AlphaBIOS console.
boot
Loads and starts the operating system.
clear
envar
Resets an environment variable to its default value.
clear password
Sets the password to zero.
continue
Resumes program execution.
crash
Forces a crash dump at the operating system level.
deposit
Writes data to the specified address.
edit
Invokes the console line editor on a RAM file or on the
nvram file (power-up script).
examine
Displays the contents of a memory location, register, or
device.
halt
Halts the specified processor. (Same as stop.)
help
Displays information about the specified console
command.
initialize
Resets the system to a known state.
lfu
Runs the Loadable Firmware Update Utility.
login
Turns off secure mode, enabling access to all SRM console
commands during the current session.
Continued on next page.

Compaq ALPHASERVER DS10 Specifications

General

Brand	Compaq
Model	ALPHASERVER DS10
Category	Music Mixer
Language	English