AlphaBIOS Console 3-45
3.11.1 Running Utilities from a Graphics Monitor
1.
Start AlphaBIOS Setup. If the system is in the SRM console, set the SRM
console environment variable to graphics and issue the command
alphabios.
2.
From AlphaBIOS Setup, select Utilities, then select Run Maintenance
Program from the submenu that is displayed, and press Enter. See Figure
3–28.
3.
In the Run Maintenance Program dialog box (Figure 3–27), type the
name of the program to be run in the Program Name field. Then Tab to the
Location list box, and select the hard disk partition, floppy disk, or CD-ROM
drive from which to run the program.
4.
Press Enter to execute the program.
Figure 3–28 AlphaBIOS Utilities Menu
PK1467-98
To Next Page
Loading...
