Compaq ALPHASERVER DS10 - Create New Partition Dialog Box; Creating and Deleting Partitions Manually

3-24 DS10 Console Reference
3.5.1 Creating and Deleting Partitions Manually
Use the Create Partition and Delete Partition options if you
need to create a custom hard disk partition arrangement or
otherwise manually manage your hard disk partitions.
Figure 3–16 Create New Partition Dialog Box
Hard Disk Setu
p
Disk 0
Q
LISP1040 #0
,
SCSI ID 3 510 MB
Partition 1 200 MB NTFS
Unused 310 MB
Create new
p
artition
,
Disk 0 Partition 2
Disk 1
NTFS
FAT
Available s
p
ace: 310 MB
New Partition Size: 200 MB
ENTER = Continue ESC = Cancel
To create a partition
1. Start AlphaBIOS and select Hard Disk Setup. Press Enter.
2. Select the disk on which to create the partition.
3. If one or more partitions already exist on the disk, select the unpartitioned
space.
4. Press Insert. A dialog box is displayed, similar to Figure 3–16.
5. Type the size of the partition to create and press Enter.