Remote Management Console 4-27
4.14.8 hangup
The hangup command terminates the modem session.
If you do not issue the hangup command, the session is disconnected
automatically after a period of idle time set by the set logout command. The
default is 20 minutes
Syntax: hangup
4.14.9 help or ?
The help or ? command displays the RMC command set.
Syntax: help
or
?
Example:
61'"LIPT
GPIEV_EPIVXTSVXa
HMWEFPI_EPIVXVIFSSXVIQSXIa
IREFPI_EPIVXVIFSSXVIQSXIa
LEPX_MRSYXa
LERKYT
LIPTSV#
TS[IV_SJJSRa
UYMX
VIWIX
WIRHEPIVX
WIX
_EPIVXGSQCQSHIHMEPIWGETIMRMXPSKSYXTEWW[SVHYWIV[HXa
WXEXYW
4.14.10 power off
The power off command is equivalent to turning off the system
power from the control panel.
If the system is already powered off, this command has no effect. You can
override the power off command either by issuing a power on command or by
toggling the Power button on the control panel.
Syntax: power off
To Next Page
Loading...
Need help?
General
