Compaq ALPHASERVER DS10 - Updating Firmware; Starting LFU from the Alphabios Console

DS10 Console Reference
1-26
1.10 Updating Firmware
Start the Loadable Firmware Update (LFU) utility by issuing the
lfu command at the SRM console prompt, booting it from the
CD-ROM while in the SRM console, or selecting Update
AlphaBIOS in the AlphaBIOS Setup screen.
Example 1–9 Starting LFU from the SRM Console
""" PJY
0SEHEFPI*MVQ[EVI9THEXI9XMPMX]
7IPIGXJMVQ[EVIPSEHHIZMGIGHEHZEI[ESV
4VIWW VIXYVR"XSF]TEWWPSEHMRKERHTVSGIIHXS0*9GHE

94("
Figure 1–6 Starting LFU from the AlphaBIOS Console
PK1461-98