3-16 DS10 Console Reference
➊
SCSI controller information — Describes the physical characteristics of
the selected SCSI controller. This line includes:
Controller — Brand and model of SCSI chip used on the SCSI
controller.
Controller number — Based on the number of SCSI controllers of a
particular type in the system. The first controller of a type is always
numbered 0.
SCSI ID number — A unique number assigned to the SCSI controller.
The standard scheme in numbering controllers is for controllers to be
SCSI ID 7.
SCSI bus number — Indicates if the controller is first or second in the
system. The first controller is tied to SCSI bus 0, and the second to
SCSI bus 1.
➋
SCSI ID — A unique number you assign to each SCSI device controlled
by the controller. This is usually done with jumpers or a thumb wheel
attached to the drive housing.
➌ Device type —Hard disk, CD-ROM, scanner, or other type of device.
➍ Size — The raw capacity of the drive. Formatting the drive with
different file systems (for example, FAT and NTFS) may result in
different usable sizes because of differences in the way those file
systems manage storage. This field is left blank if it is not applicable to
a device (for example, a scanner).
➎ Description — The name and model of the device as recorded in the
device’s firmware.
To Next Page
Loading...
Need help?
General
