Operations 1-35
➊
Select the device from which firmware will be loaded. The choices are
the internal CD-ROM, the internal floppy disk, or a network device.
In this example, the internal floppy disk is selected.
➋
Select the file that has the firmware update, or press Enter to select
the default file. When the internal floppy disk is the load device, the
file options are:
DS10CP (default) SRM console and AlphaBIOS console firmware
only.
DS10IO I/O adapter firmware only.
The default option in Example 1–11 (DS10FW) is not available, since
the file is too large to fit on a 1.44 MB diskette. This means that when
a floppy disk is the load device, you can update either console
firmware or I/O adapter firmware, but not both in the same LFU
session. If you need to update both, after finishing the first update,
restart LFU with the lfu command and insert the diskette with the
other file.
In this example the file for I/O adapter firmware is selected.
➌
Use the LFU list command to determine the revision of firmware in a
device and the most recent revision of that firmware available in the
selected file. In this example, the update revision for console firmware
displays as “Missing file” because only the I/O firmware files are
available on the floppy disk.
To Next Page
Loading...
Need help?
General
