Compaq ALPHASERVER DS10 - Page 51

Operations 1-37
➍
The update command updates the device specified or all devices.
➎
For each device, you are asked to confirm that you want to update the
firmware. The default is no. Once the update begins, do not abort the
operation. Doing so will corrupt the firmware on the module.
➏
The lfu command restarts the utility so that console firmware can be
updated. (Another method is shown in Example 1–14, where the user
specifies the file DS10FW and is prompted to insert the second
diskette.)
➐
The default update file, DS10CP, is selected. The console firmware
can now be updated, using the same procedure as for the I/O
firmware.
➑
The exit command returns you to the console from which you entered
LFU (either SRM or AlphaBIOS).
Example 1–14 Selecting DS10FW to Update Firmware from the
Internal Floppy Disk
""" PJY
0SEHEFPI*MVQ[EVI9THEXI9XMPMX]
7IPIGXJMVQ[EVIPSEHHIZMGIGHEHZEI[ESV
4VIWW VIXYVR"XSF]TEWWPSEHMRKERHTVSGIIHXS0*9 HZE
4PIEWIIRXIVXLIREQISJXLIJMVQ[EVIJMPIWPMWXSV
4VIWW VIXYVR"XSYWIXLIHIJEYPXJMPIREQI?(7-3(7'4A (7J[
'ST]MRK(7*;JVSQ(:%
'ST]MRK8'6)%(1)JVSQ(:%
'ST]MRK8'761631JVSQ(:%
'ST]MRK8'%6'631JVSQ(:%
'ST]MRK'-4'%JVSQ(:%
4PIEWIMRWIVXRI\XJPSTT]GSRXEMRMRKXLIJMVQ[EVI
4VIWW VIXYVR "[LIRVIEH]3VX]TI(32)XSEFSVX
'ST]MRK'-4'%JVSQ(:%
'ST]MRK(*4%%JVSQ(:%
'ST]MRK/>47%%JVSQ(:%

