Operations 1-39
Before starting LFU, download the update files from the Internet. You will
need the files with the extension .SYS. Copy these files to your local MOP
server’s MOP load area.
➊
Select the device from which firmware will be loaded. The choices are
the CD-ROM, the internal floppy disk, or a network device. In this
example, a network device is selected.
➋
Select the file that has the firmware update, or press Enter to select
the default file. The file options are:
DS10FW (default) SRM console, AlphaBIOS console, and I/O
adapter firmware.
DS10CP SRM console and AlphaBIOS console firmware
only.
DS10IO I/O adapter firmware only.
In this example the default file, which has both console firmware
(AlphaBIOS and SRM) and I/O adapter firmware, is selected.
➌
Use the LFU list command to determine the revision of firmware in a
device and the most recent revision of that firmware available in the
selected file. In this example, the resident firmware for each console
(SRM and AlphaBIOS) and I/O adapter is at an earlier revision than
the firmware in the update file.
Continued on next page
To Next Page
Loading...
Need help?
General
