vi
Chapter 2 SRM Console
2.1 Invoking the SRM Console 2-2
2.2 Commands 2-3
2.2.1 Command Summary 2-3
2.2.2 Commands: Syntax 2-5
2.2.3 Commands: Special Keystrokes and Characters 2-6
2.3 Show Commands 2-8
2.3.1 Show Config 2-8
2.3.2 Show Device 2-10
2.3.3 Show Memory 2-12
2.3.4 Show PAL 2-12
2.3.5 Show Power 2-13
2.3.6 Show Version 2-14
2.4 Creating a Power-Up Script 2-14
2.5 Booting the Operating System 2-16
2.6 Configuring a PCI NVRAM Module 2-18
2.7 Testing the System 2-19
2.8 Set Commands 2-23
2.8.1 Set Password 2-23
2.8.2 Set Secure 2-24
2.9 Secure Mode 2-25
2.9.1 Login Command and Secure Mode 2-25
2.9.2 Clear Password 2-26
2.9.3 Resetting the Password 2-27
2.10 Stopping and Starting CPU 2-28
2.11 Updating Firmware 2-28
2.12 Forcing a System Crash Dump 2-30
2.13 Using Environment Variables 2-31
2.13.1 Set envar 2-31
2.13.2 Show envar 2-32
2.14 Depositing and Examining Data 2-33
2.15 Reading a File 2-34
2.16 Initializing the System 2-35
2.17 Finding Help 2-36
2.18 Switching from SRM to AlphaBIOS Console 2-37
2.19 Environment Variable Summary 2-38
2.19.1 auto_action 2-40
2.19.2 bootdef_dev 2-40
2.19.3 boot_osflags 2-41
2.19.4 com1_baud 2-43
2.19.5 com1_mode 2-43
To Next Page
Loading...
