SRM Console 2-29
***** Loadable Firmware Update Utility *****
------------------------------------------------------------------
Function Description
------------------------------------------------------------------
Display Displays the system’s configuration table.
Exit Done exit LFU (reset).
List Lists the device, revision, firmware name, and update
revision.
Readme Lists important release information.
Update Replaces current firmware with loadable data image.
Verify Compares loadable and hardware images.
? or Help Scrolls this function table.
------------------------------------------------------------------
UPD> update *
Confirm update on:
nt
srm
[Y/(N)]y
WARNING: updates may take several minutes to complete for each device.
DO NOT ABORT!
nt Updating to 5.69... Verifying 5.69... PASSED.
srm Updating to 5.4-2... Verifying 5.4-2... PASSED.
UPD> exit
NOTE: If the system has been shut down from a booted program (most
commonly, the operating system) or in some other way halted back to
the SRM console, the system must be reset before running LFU.
See Chapter 1 for more information about LFU.
To Next Page
Loading...
Need help?
General
