Compaq Deskpro EN Series

Index I-5
removal and replacement
3.5-inch drive release latch,
5-16
5.25-inch drive, 5-13, 6-12
5.25-inch drive release latch,
5-17
AGP graphics board, 5-34,
6-29
battery, real time clock, 5-33,
6-28
bezel blank, 5-9, 6-10
cable lock, 5-5, 6-6
chassis guide bracket, 5-28,
6-24
computer base, 6-4
computer feet, 6-5
cover latch retainer, 5-10
cover lock solenoid, 5-39,
6-34
DIMM, 5-32, 6-27
drive adapter, 5-14, 6-13
drive cage, 5-18
drive release latch, 6-15
expansion board, 5-20, 6-17
expansion board cage, 5-21,
6-18
expansion board cage guide
bracket, 5-25, 6-21
fan, 5-27, 6-23
feet, 5-3, 6-5
front bezel, 6-8
graphics board, 5-34, 6-29
graphics memory, ATI
RAGE PRO, 5-36, 6-31
graphics memory, Matrox
Millennium II, 5-35
graphics memory, Matrox
Millennium II, 6-30
hard drive, 5-12, 6-11
lifting lever, 5-26, 6-22
memory module, 5-32, 6-27
microprocessor, 5-30, 6-26
power button, 5-8, 6-9
power supply, 5-38, 6-33
power switch cable, 5-40,
6-35
processor, 5-30, 6-26
quick release cover latch, 5-7
riser board, 5-24, 6-20
speaker assembly, 5-37, 6-32
system board, 5-29, 6-25
system unit cover, 6-7
system unit cover, 5-6
replicating your setup, 2-28
return kit
spare part number, 3-24
riser board
disconnecting and raising,
5-19, 6-16
removal and replacement,
5-24, 6-20
riser board/backplane
spare part number, 3-11
ROM upgrade
recovery from ROM upgrade
failure, 2-25
remote, 2-24
ROMPaq diskette, 2-24
S
screws, 4-6
SCSI
cable spare part number, 3-9
connector pin assignments,
A-4
controller spare part number,
3-13
device daisy-chain, G-1
device ID number, G-1
external devices, G-1
installation guidelines, G-1
startup sequence, G-1
termination, G-1, G-2
troubleshooting without
diagnostics, F-9
SCSI hard drive
specifications, 8-6
Security Management
cable lock provision, 2-21
serial
interface control, 2-15
serial interface pin
assignments, A-2
serial number, 1-7
serial number location, 5-1,
6-1
serial port
test error code, D-4
service considerations, 4-6
setup password, 2-15, 2-16
setup utilities, 2-4
using, 2-5
shipping boxes
spare part numbers, 3-24
slot cover
spare part number, 3-22
SMART
hard drive, C-1
Smart Cover Lock, 2-16, 2-19
Smart Cover Sensor, 2-15,
2-19
setting protection level, 2-19
SMART Hard Drive Fault
Prediction, 2-22
soft-drive type assignments,
C-1
software
preloaded, 1-7
required for service, 4-6
software recovery, 2-12
speaker
desktop spare part number,
3-3
minitower spare part number,
3-5
removal and replacement,
5-37, 6-32
specifications
CD-ROM drive, 8-7, 8-8
diskette drive, 8-4
hard drive, 8-5, 8-6
keyboard, 8-9
mouse
system, 8-1
standard and optional boards
illustrated, 3-10
spare part numbers, 3-11
static
generating, 4-2
shielding protection levels,
4-3
Support Software CD, 2-3
Surge-Tolerant Power Supply,
2-23
suspend
configuring power button,
2-28
system
DMA, 8-2
I/O, 8-3
interrupts, 8-2
memory map, 8-4
specifications, 8-1
system board
removal and replacement,
5-29, 6-25
spare part number, 3-11
system design, 1-5
system unit
desktop spare part numbers,
3-3