Compaq Deskpro EN Series of Personal Computers 5-1
chapter
5
D
ESKTOP
R
EMOVAL AND
R
EPLACEMENT
After completing all necessary removal and replacement procedures, run the Diagnostics utility to
verify that all components operate properly.
CAUTION:
When the computer is plugged into an AC power source, there is always voltage applied to the
system board. You must disconnect the power cord from the power source before opening the computer
to prevent system board or component damage.
5.1 Serial Number Location
The computer serial number should be provided to Compaq when requesting information or
ordering spare parts. The serial number is displayed on the top of the system unit cover at the right
front corner and also on the rear of the computer.
Serial Number Location