Compaq Deskpro EN Series of Personal Computers 2-5
Secure the serial, USB, or parallel ports so that they cannot be used until they are
unsecured.
Enable or disable QuickLock and QuickBlank features.
Enable or disable removable media boot ability.
Enable or disable removable media write ability.
Solve system configuration errors detected but not automatically fixed during the Power-
On Self-Test (POST).
Replicate your system setup by saving system configuration information on diskette and
restoring it on one or more computers.
Using Computer Setup Utilities
To access the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start Æ Shut Down Æ Restart
the Computer.
2. When the F10 Setup message appears in the lower-right corner of the screen, press the F10
key. Press Enter to bypass the title screen, if necessary.
✎
If you do not press the F10 key while the message is displayed, you must turn the
computer off, then on again, to access the utility.
A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power, and Advanced.
3. Using the arrow keys or the Tab key, select the option you want and press the Enter key. To
return to the Computer Setup Utilities menu, press the Esc key.
4. To apply and save changes, select File Æ Save Changes and Exit. If you selected an option
that automatically restarted the computer, changes were applied at that time. If you have made
changes that you do not want applied, select Ignore Changes and Exit. If you have already
applied changes you now want to eliminate, select Set Defaults and Exit. This option will
restore the original system defaults.
To Next Page
Loading...
Need help?
General