2-10 Software Reference
3. Select one of the following from the test option menu:
❏
Quick Check Diagnostics—This option runs a quick, general test on each device
with a minimal number of prompts. If errors occur, they are displayed when the
testing is complete.
❏
Automatic Diagnostics—This option runs unattended, maximum testing of each
device with minimal prompts. You can choose how many times to run the tests, to
stop on errors, or to print or file a log of errors.
❏
Prompted Diagnostics—This option allows maximum control over the device
testing process. You can choose attended or unattended testing, decide to stop on
errors, or choose to print or file a log of errors.
4. Follow the instructions on the screen as the diagnostic tests are run on the devices.
To exit either TEST or INSPECT, press the Esc key to reach the Exit option. Then press Enter.
2.5.4 Enhanced Compaq Insight Personal Edition
(Compaq Diagnostics for Windows)
Enhanced Compaq Insight Personal Edition is a component of Intelligent Manageability that
allows you to view:
System overview
AssetControl information
Input devices
Communications ports
Storage devices
Graphics information
Memory configuration
Security management settings
System health
Operating system
Windows version
Depending on the version, Compaq Insight Personal Edition may include diagnostic tests to
determine if all the devices installed on the computer are recognized by the system and are
functioning properly.
To Next Page
Loading...
Need help?
General