122 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. F
Managing the DeviceMaster
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX. Use the appropriate procedure for your site:
• Telnet Session (below)
• SSH Session on Page 124
Telnet Session
Use the following procedure to access a telnet session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster in the Device List pane for which you want
to open a telnet session, and click Telnet/SSH Session.
2. Leave the popup set to Telnet and Selected Port 23, and click Ok.
To Next Page
Loading...
