Comtrol DeviceMaster PRO - External Power Supply Specifications; 1-Port 5 VDC Panel Mount Power Supply

DeviceMaster Installation and Configuration Guide: 2000594 Rev. F External Power Supply Specifications - 139
External Power Supply Specifications
This section discusses information that you may need if you wish to use your own external power supplies.
• 1-Port 5VDC Panel Mount Power Supply (below)
• 1-Port Panel Mount 5-30VDC Power Supply on Page 140
• DM-2101 and DM-2201: 1-Port DIN Rail Power Supply on Page 140
• DM-2202 and DM-2402: 2-Port (Serial Terminals) Power Supply on Page 141
• DM-2102 and DM-2302: 2-Port DB9 Power Supply (Bottom) on Page 142
• DM-2102 and DM-2302: 2-Port DB9 Power Supply (Top) on Page 143
• DM-2304: 4-Port DIN Rail Models Power Supply on Page 144
• 4-Port Panel Mount Power Supply on Page 144
• 8-Port Power Supply on Page 145
• 16-Port Power Supplies on Page 145
1-Port 5VDC Panel Mount Power Supply
This subsection only provides information for the DeviceMaster 1-port 5VDC panel
mount model.
The following table provides the DeviceMaster power specifications, if you intend on purchasing your own
external power supply.
Comtrol Power Supply: 1-Port 5VDC
Input line frequency
Input line voltage
Output voltage
Output current
47 - 63 Hz
90 - 260VAC 
5VDC
2.0A @ 5VDC
1-Port 5VDC External Power Supply
Output voltage†
Current†
Power
5VDC
420 mA (Min) @ 5VDC
2.1 W
† Any power supply that meets current consumption, voltage,
power, and connector pin outs requirements can be used.
+VDC
Power Connector
Coaxial 5.5±0.1 x 2.1 mm