86 - DeviceMaster Security DeviceMaster Installation and Configuration Guide: 2000594 Rev. F
Changing Keys and Certificates
Changing Keys and Certificates
Use the following steps to update security keys and certificates in the DeviceMaster. Refer to the help system
or
Key and Certificate Management subsection on Page 86 for detailed information.
1. If necessary, enter the IP address of the DeviceMaster in the Address field of your web browser and press
the Enter key.
2. Click Network | Keys/Certs.
3. Click Browse to locate the key or certificate file, highlight the file, and click Open.
4. Click Upload.
5. Click Save, but changes will not take effect until the DeviceMaster is rebooted.
Note: The key or certificate notation changes from factory or none to User when the DeviceMaster is secure.
You can reboot the DeviceMaster by clicking System | Reboot or use the PortVision DX reboot optione.
To Next Page
Loading...
