15
Log-in / Log-out
Getting
Started
System Shutdown
1. In the monitoring screen, click <MENU> in the bottom left corner of the
screen click <SHUTDOWN> the system, or press the [POWER] button
on the remote control.
2. Use the virtual keyboard to enter the password.
3. Be sure to turn off the power switch on the rear panel.
! If you turn off the system in an abnormal manner such as
removing the power cord while the system is in operation,
the disk will create or increase the bad sectors, causing
data loss and shortening the life cycle of the disk.
To Next Page
Loading...
