Concept Pro VXH960-4 - System Setup - Date;Time

43
System Setup
System
Settings
Date/Time
Specify the current date and time.
1. From <SYSTEM SETUP> - <SYSTEM>, select <DATE / TIME>.
2. Use the [pqtu/ENTER] buttons on the remote control
or use the mouse to change the time or set the options as necessary.
> DATE/TIME: Allows the operator to set or modify the current date
and time.
Click< > to adjust the time manually.
> DATE FORMAT: specify the date format.
> TIME FORMAT: specify the time format.
> TIME SERVER: obtain the current time from the time
server. Click < > to get the current time.
> AUTO TIME SYNC: automatically synchronize the time with the
time server at a speci c time.
> SYNC AT: Set the time to sync with the time server.
> TIMEZONE: Specify the GMT standard time for your local area.
> DST: You can set up or release the DST (Daylight Saving Time).
R Both <TIME SERVER> and <TIME SYNC> will been abled
only if the DVR is connected to the Internet.
3. To apply the change, click <APPLY > at the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click
<CLOSE> in the lower screen. The con rmation message appears and
you will return to the previous menu.
You can con gure the settings of date/time, system management, control
device and system security.