24
Disk status
You can check status and information on storage devices currently
connected to the system.
Click <OK> to close the window.
R For more information, refer to “Disk Information”. (page 47).
Saving captured snapshots
You can capture the current video screen and save or export to a connected
storage device.
1. Select a channel rst, and right click to open the popup menu, and
select <SNAPSHOT> menu item, or press the [SNAPSHOT] button on
the remote control.
2. Connect a storage device, and click the <EXPORT> button.
To save the captured image onto the built-in HDD, press the <RESERVE>
button.
R Saved image can be found in the “Archive>Reserved data
management” and can be backed up (Page 72)
3. Enter the <TAG NAME> and <MEMO> and press <BURN> or
<ERASE & BURN> button.
> A progress bar appears and indicates the progress of exporting to
storage device.
> BURN: Snapshot is stored in the connected USB storage device.
> ERASE & BURN: Deletes all les in the connected USB storage and
then saves the snapshot.
! Note that <ERASE & BURN> option erases all data in the USB storage
device and will not be restored once deleted.
Live Screen at a glance
Getting
Started
To Next Page
Loading...
