86
SYSTEM
Date/Time Setting
Specify the current date and time.
When done, click <APPLY> to apply the changes.
R For more information about each of the time and date settings, refer to
“Date/Time”. (page 43)
System Information
You can check information of system rmware version, disk
space, and network settings, as well as the status information
of network connection and alarm I/O.
Control Device Setting
Set the connection of both the remote control and the keyboard control.
Changethecommunication settings and click <APPLY>to apply the changes.
R For more information about each communication item, refer to “Control
Device”. (page 46)
System Management
You can con gure the System ID, the access settings of: log in, log out, and
auto logout.
R For more information about system management refer to “System
Management”. (Page 44)
Setup
Web Viewer
To Next Page
Loading...
