Concept Pro VXH960-4 - Video Loss

56
Video Loss
You can specify a reaction to the case where no video is received from the
camera.
1. From <SYSTEM SETUP> - <EVENT>, select <VIDEO LOSS>.
2. Use the [pqtu] buttons on the remote control or use the mouse to
specify the reaction to a video loss.
> ALARM OUTPUT: Specify the alarm output channel if a video loss
occurs.
> PRESET: Specify a preset position for a PTZ camera
> Specify the output of the buzzer if a video loss occurs.
> Select to send an email if a video loss occurs.
> Select to send a noti cation to an FTP site if video loss occurs.
3 To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click
<CLOSE> in the lower screen. The con rmation message appears and
you will return to the previous menu.
Event Setup
System
Settings