Contex GX67D - Page 121

Using the scanner, how do I …? 5-10
To set the copy Original Type for Color::
On the iJET Panel –
1. Press the button to enter the main Menu.
2. The Org. Type-Color option should be the first option to appear.
If it is not, use the arrow up/down buttons
to move through the Menu options until the
display shows Org. Type-Color as shown below.
3. Press
Enter
to move the “>” marker down to indicate you want to change the Org. Type-
Color value.
4. Press the arrow up/down buttons
to change the Org. Type-Color value that matches
the original and copy job. Choose one of the “(Ink)” original types if your original was
created on an ink jet printer. The display shown below is set for a brochure (document with
photos and text) that was printed on an ink-jet printer.
5. Press the
Enter
button to accept the selected value. The “>” marker will move up to the
Menu level indicating that the value is set and you can step on through the menu options if
needed. The new Org. Type-Color value will be applied every time you press the Color
Copy button until you repeat the steps above to change it.
Org. Type-Color
> Brochure (Ink)
The ”>” marker is on the Menu level. You can continue
navigating the menu options with the arrow up/down
buttons.
> Org. Type-Color
Brochure (Ink)
Menu
The “>” marker is down to the value level so you can
change the value.
Org. Type-Color
> Photo
> Org. Type-Color
Photo