Maintenance 7-8
7.5 Replacing Scanner Parts
This section describes how to replace those scanner parts that are liable to wear down over
long-term use. Changing parts will renew your scanner and ensure optimal results. Your
scanner monitors usage of parts and will warn you when it is time for a replacement through a
message in the iJET Panel display window.
Some scanner models are designed so users can replace parts on their own (user-replaceable
parts) while other scanner models will require a service technician. The instructions in this
section apply only for scanners with user-replaceable parts. You can see which parts are user-
replaceable on your scanner in the table below.
Scanner Type Parts that are User-Replaceable
White-background-platen, Lamp, Dust filters
Glass-plate, White-background-platen, Lamp, Dust filters
Important Safety Instruction: Before replacing any user-replaceable parts, be sure to turn
the scanner power off and disconnect the power plug.
To Next Page
Loading...
