iJET Panel Quick Reference Guide 10-5
iJET Panel Menu diagrams
About The menu diagrams:
1. The value displayed first is the current value. In the diagrams the factory Default value is shown as the first value as this
will be the case until you change it.
2. The quick buttons (
Lightness, Scale, Quality, Copies) are shown as buttons that bypass the option entry point. This
means that the quick buttons start their options with the “>” marker already on the value level so you do not need to press
Enter to start viewing values with the arrow up/down buttons.
3. The quick buttons (
Lightness, Scale, Quality, Copies) can also step through their values by repeated presses to the
button (alternative to using arrow up/down). This functionality is not displayed in the diagrams.
4. When you have set an option, you need to press Enter to accept it. This is not shown in the diagrams.
5. A complete menu option reference table including option descriptions, menu paths and descriptions of available settings
follows after the menu diagrams.
To Next Page
Loading...
