Contex GX67D - How Do I

Using the scanner, how do I …? 5-6
needed. The new Scale value will be applied every time you press the B&W Copy or Color
Copy button until you repeat the steps above to change it.
5.2.3 How do I…Set Copy Quality?
You can determine the output quality. The best quality will take the longest to output and use
the highest amount of ink on inkjets. You may want to use the Fast quality setting for test
copies. Yo can set Quality to one of its three options: Fast, Normal, Best.
You can see which of the quality settings is active by the LEDs above the Quality button. The
active setting will be the only one that is lighted. In the example below the Best setting is active.
You can press the Quality button until the LED for the Quality setting you want to use lights up.
Fast Normal Best
Qualit
y
To set the copy Quality value:
On the iJET Panel –
1. Quick - Press the Quality button. The iJET Panel display will open the Quality
option with the “>” marker on the value level indicating you can immediately change the
Quality option’s value. From here you can skip steps 2 and 3 and go to step 4 to change the
value.
2. Menu – Press the button to enter the main Menu.
Use the arrow up/down buttons
to move through the Menu options until the display
shows Quality.
3. Press
Enter
to move the “>” marker down to indicate you want to change the Quality
value.
4. There are two ways to change the value:
5. Repeated presses to the Quality button will change the Quality value forward through
Fast, Normal, Best. The list wraps around meaning that you step from Best to Fast when
you continue to press the button.
Menu
Quality
> Fast
Quality
Quality
>Normal
Quality
Quality
> Best
Quality
> Normal
Qualit
y
The “>” marker is down to the value level so you can
change the value.
Quality
> Normal
> Quality
Normal
The ”>” marker is on the Menu level. You can continue
navigating the menu options with the arrow up/down
buttons.
> Scale %
201