The iJET Panel 2-4
2.5 The iJET Panel Buttons - Overview
The Menu button
Menu button - The Menu button leads to the total range of options for copying and also the
Advanced menu with all the system setup and configuration functions.
A complete description on how to navigate the menu and select options follows below.
The Back button
Control Button – for moving one level up when in a menu or for returning to an option’s current
(active) setting while in the process of editing the option’s value.
The Enter button
Control Button – for entering the menu functionality for changing an option’s value and for
setting (accepting) the value once it is selected.
The Size button
Settings button - For setting the size of the original. The Size button is used for both copy and
scan-to-file operation. Press the button to activate option setting. You then change the value
each time you again press the button or with the arrow up/down buttons. You can select Auto
detection or a standard size setting.
NOTE that Size is a global system variable that can be changed in 3 different ways: 1. With the
Size button 2. With the Menu button > Size option and 3. With the Scan-to button > Size option.
This means that when you change the size for a copy job, it will also apply for a scan-to-file job
and vise versa unless you change it again.
The Lightness button
Settings (quick) button - For increasing or decreasing lightness in the copy. Press the button to
activate option setting. You then change the value each time you again press the button or with
the arrow up/down buttons.
The Quality button
Settings (quick) button - For setting copy quality to Fast, Normal or Best. Press the button to
activate option setting. You then change the value each time you again press the button or with
the arrow up/down buttons.
The Copies button
Lightness
Copies
Qualit
To Next Page
Loading...
