Contex GX67D - Page 192

iJET Panel Quick Reference Guide 10-27
Resolution
Setting image quality in DPI
(dots per inch)
50 to 9600 Select a value from the list of values available.
High resolutions create large files. 300 dpi or
more is adequate for printing. Certain maps and
CAD drawings with high levels of detail require
high resolutions. CAD processing of the result
may also require that you select a high resolution.
Dpi value settings below or equal to the scanners
optical dpi will give pure optical resolutions
without interpolation.
See your scanner model specifications to view the
scanner’s optical resolution.
Size
The Size value determines the
scan area. Usually this would be
the size of the original unless
you wish only to input a portion.
The
Size button will activate this
same option.
This menu option can also be
reached and set with the
Size
quick button.
Auto,
Standard sizes
Default:
Auto
You can select
Auto detection or a standard size
setting.
Auto will detect the edges of the original
and set the scan area to the full original size.
Size is a global system variable that can be
changed with the
Size button, the Menu button >
Size option and the Scan-to button > Size option.
File Format
To select the best file format for
your task.
JPEG,
TIFF,
PDF
Default: PDF
•
JPEG – If selected you can set a quality
factor from 1 to 100. 70 is default.
• TIFF – If selected you can set quality to
Uncompressed or PackBits.
• PDF – If selected you can set a quality factor
from 1 to 100. 70 is default