Configuration and Setup 3-8
On the iJET Panel
Select Menu > Advanced > Options > Closed Loop Cal.
Press Enter and then use the arrows up/down buttons to reach the right media type and Enter to select.
On “Print Sheet” select Enter. The system will print a color patch sheet.
Feed the sheet into the scanner
On “Scan Sheet” select Enter. The system will scan the color patch sheet and calculate color matching values
for future jobs with the current media type.
See the section on “how do I… Create a New Media Type” for more details.
12 Test your system
Make a simple copy to test your system.
See the section on “how do I… Make a Copy” for details.
13
Verify Scan to File functionality
Scan to a network PC to test Scan to file functionality. The PC must have WIDEsystemNET installed and must
be setup for network scanning.
See instructions on setting up a PC for scan2net in WIDEsystemNET on-line help. See more on
scanning to a PC in the section “How do I…
Control from the iJET Panel – Scan to local or network PC”
14
Verify Shared Scanner functionality
The netwok PC must have WIDEsystemNET and compatible scan/copy software installed. Check that you can
identify the scanner from the PC and perform a test scan.
See instructions on setting up a PC for scan2net in WIDEsystemNET on-line help. See more on using a
shared scanner in the scan or copy application’s on-line help.
Menu
To Next Page
Loading...
