CPI COTI - Timed Events

Secon 5 - Engineer’s Program
Note: It is highly recommended the following two codes are changed on all machines.
1. Change Keyless Jugvend PIN - this displays and enables the pin to be changed to
enable the user to select a jug vend.
2. Change Keyless Freevend PIN - this displays and enables the pin to be changed to
enable the user to select a Freevend.
5.13 Timed Events
This enables the creaon, deleon and update of med events programmed to acvate the
following events.
1. Time of Day Events - This enables the setup of discounted vend, free vend and inhibited
vend periods.
2. Sanitaon Events - This enables the setup of periods when the machine will
automacally ush through the water system.
3. Backup Events -This enables the machine to be programed to perform an automac
backup of all user congurable sengs and sales data stored in its memory.
4. Power Saving Events - This enables the setup of periods when the machine enters a
power saving mode. In this mode the water in the boiler is not maintained at the
programmed vend temperature but at a lower temperature of 167°F.
The method for creang/updang a med event is the same for each of the four event
types. The following example describes how the engineer would program the machine to
free vend specic drink selecons between 10.30 am and 2:30 pm on week days.
Following this example will provide an understanding of how med events are created.
100