CPI COTI - Telemetry

Secon 5 - Engineer’s Program
Technical Manual
12. All the required parameters for the event are now set and the screen below displays
the parameters of the Free Vend event.
Note: When seng a discount price event it is necessary for the engineer to enter a value
for the discount as a percentage (%). If the machine is ed with a coin mechanism please
ensure that the discount value entered is supported by the coin tubes.
5.14 Telemetry
This feature is only for use with the Crane Telemetry system.
5.14.1 Assign Unit
To enable this set up of the GSM module an aerial and wiring must have been installed. You
will need to know the atlas board serial number (secon 5.11.3), have the correct VIX le on
a USB sck and have access to the Crane Cashless app.
1. Use the Crane Cashless app to ensure the board is assigned correctly
Assigned Not assigned
Check that the account details are correct.
103