Secon 6 - Service Keypad Funcons
6.2 Service Screen Funcons - LINEA
When the machine door is opened you will see one of the below service screens depending
on whether you have an espresso, fresh brew or instant machine. This enables the Operator
to carry out specic funcons during roune cleaning and maintenance.
6.2.1 Enter Pin - Entry to Engineer’s or Operator’s program using the appropriate code
1111 or 2222
6.2.4 Test Vend - See secon 6.1.6
Note: place cup under dispense nozzles before following instrucons
6.2.2 Sanisaon rinse - See secon 6.1.3
6.2.3 Data Recall - See secon 6.1.5
6.2.5 CoEx® Boiler Fill - See secon 6.1.9
6.2.6 CoEx® Boiler Cool Down - See secon 6.1.10
6.2.7 CoEx® Tablet Clean - See secon 6.1.11
6.2.8 Reset Waste - See secon 6.1.12
6.2.9 Brewer Open - See secon 6.1.2
6.2.10 Brewer rinse - See secon 6.1.4