CPI COTI - Section 5 - Engineers Program; Menu Overview

Secon 5 - Engineer’s Program
Technical Manual
Secon 5 - Engineer’s Program
The Engineer’s Program enables the machine to be congured, and sales and diagnosc
informaon viewed. The machine is supplied with default conguraons for minimum
setup me, however some setup is required and certain sengs can be adjusted for
individual consumers and their preferences. For detailed informaon on how to access this
program, navigate, select and enter values refer to in Secon 3 - Programming Mode .
The menu structure is laid out below with brief explanaons for each screen and
references to more detailed informaon and tasks.
5.1 Menu Overview
Main Menu page 1/2 (Section 5.2)
Data Recall (Section 5.3)
Non Resettable Sales Data
the cumulative data values for the life of the machine/atlas
board
Resettable Sales Data
enables data to be viewed and cleared, enabling data to be
recorded over a period of time
Sales Groups
enables drinks to be linked as a group for easier
reviewing
Events
enables certain events which have happened on the machine to
be viewed: power losses, door opened, last actions etc..
SureVend
TM
displays details of SureVend
TM
activities
Diagnostics (Section 5.4)
enables any current errors to be viewed, if the error is reced
it will automacally be removed from the list
Acve errors
enables errors which have occurred in the past to be viewed.
(this data can be cleared)
Error History
Enables the logging of the MDB line (NOTE: Debug Log Enable
must be enabled in System Sengs for this feature to work).
MDB Logging
Test page 1/2 (Section 5.5)
Switches & Sensors
displays the current state of all switches and sensors in the
machine
Components enables individual or collective components to be tested
47