Secon 5 - Engineer’s Program
Technical Manual
5.5.11.4 Inlet Valve
Use this opon to test the correct operaon of the inlet valve. No water will be dispensed
during this test but you will be able to monitor the voltage with a mulmeter.
5.5.11.5 Two Way Valve
Use this opon to test the correct operaon of the two way valve. No water will be
dispensed during this test but you will be able to monitor the voltage with a mulmeter.
5.5.12 Sck Srrer
Use this opon to test the correct operaon of the Sck Srrer dispenser.
5.5.13 Extract Fan
This opon is reserved for future use.
5.6 Price
This menu allows the engineer to enter individual prices for each drink selecon available,
one price for all drink selecons, set a discount for consumers who use their own cup/mug
and view the highest and lowest price set in the machine.
Tip: If most selecons are to be sold at the same price, use the Enre Machine menu to
quickly set the enre machine to this price then access the Individual Prices menu to adjust
prices for individual selecons. Entering a single price for the enre machine will over-ride
any individual prices previously programmed.
5.6.1 Individual Prices
This opon enables the price of each drink to be set. Each drink selecon is shown with the
current price. Select the required drink and enter the new price in the value entry screen.