CPI COTI - Page 74

Secon 5 - Engineer’s Program
3. Select Start to start the vend process; drop a cup and dispense the drink.
Note: If the SureVend
TM
system is turned on the sensors must be acvated within 3 seconds
of the cup being dispensed.
4. Each drink can be tested as required by repeang the procedure above.
5.5.10 Cup Drop: COTI
This menu opon enables the engineer to test the operaon of the cup drop unit to ensure
a cup is dropped and that the turret indexes correctly.
While the test is running a Cup Dropping message will be displayed. On a successful
compleon of the test the screen returns to the Test screen.
5.5.11 CoEx® Module
This menu enables the engineer to test the operaon of the CoEx® module components.
While the tests are running the ‘test animaon’ accompanied by a Test Started message will
be displayed. On a successful compleon of the test the screen returns to the CoEx®
Module screen.
5.5.11.1 Home Brewer
Use this opon to ensure that the brewer is able to reset and return to the home posion.
5.5.11.2 Espresso Valve
Use this opon to test the correct operaon of the espresso valve. No water will be
dispensed during this test but you will be able to monitor the voltage with a mulmeter.
5.5.11.3 Water Pump 1 and 2
Use this opon to test the correct operaon of the water pump/s as ed to the machine.
No water will be dispensed but you will be able to hear the pump running.
Note: LINEA machines only have one pump.
64