CPI COTI - Page 4

Introducon / Important Informaon
WARNING: ENSURE THAT POWER IS DISCONNECTED
FROM THE VENDER BEFORE INSPECTING ELECTRICAL COMPONENTS, OR
WORKING WITH OR ADJUSTING THE VENDING MECHANISM. FAILURE TO
COMPLY WITH THESE INSTRUCTIONS MAY SUBJECT THE USER TO THE RISK OF
ELECTRICAL SHOCK OR MECHANICAL INJURY,
WHICH CAN BE SERIOUS OR FATAL.
GENERAL INFORMATION
VENDER SAFETY PRECAUTIONS
Please read this manual in its enrety. This service informaon is intended for use by a
qualied service technician who is familiar with proper and safe procedures to be followed
when repairing, replacing or adjusng any Crane Merchandising Systems vendor
components. All repairs should be performed by a qualied service technician who is
equipped with the proper tools and replacement components, using genuine Crane
Merchandising Systems factory parts. This Vender should only be used by those individuals
that have a clear understanding of how to operate a vending machine in a safe manner.
REPAIRS AND/OR SERVICING ATTEMPTED BY UNQUALIFIED PERSONS CAN RESULT
IN HAZARDS DEVELOPING DUE TO IMPROPER ASSEMBLY OR ADJUSTMENTS WHILE
PERFORMING SUCH REPAIRS. PERSONS NOT HAVING A PROPER BACKGROUND
MAY SUBJECT THEMSELVES TO THE RISK OF INJURY OR ELECTRICAL SHOCK WHICH
CAN BE SERIOUS OR EVEN FATAL.
PRODUCT IDENTIFICATION
First producon of COTI MODELS 608 fresh brew, 609 freeze dried and 610 bean grinder
Venders with new electronics plaorm was Setember 2020. The producon date of Crane
Merchandising Systems products is now determined by the date code incorporated in the
serial number.
The Machine serial number incorporates the build date, in the format:
31yymmddxxxx
31 indicates the COTI model, yymmdd is the year, month, & date of producon, and xxxx is a
sequenal build number.
CE Mark & IIA DECLARATION
A declaraon of conformity document can be provided upon request: If needed please
contact Technical Support Manager in Williston, SC. Phone +1.803.266.5001 or email
service@cranems.com