CPI COTI - Page 59

Secon 5 - Engineer’s Program
Technical Manual
Copy content from USB stick copy User Interface images onto the machine
Remove content from
machine
enables images on the machine to be deleted
Change products information
enables the product name, description and images on the
drink selection screen to be changed.
Change Group Informaon enables group informaon to be changed
Congure Generic Content enables an End of Vend image or video to be added
Heater Tank Setup
enables the target water temperature, minimum tempera-
ture for a drink and displays current tank temperature
Product Configuration Page 2/4 (Section 5.7.9)
Selection Timers enables the recipes of each drink to be adjusted
Custom Selection Names
enables a name to be selected for soup and flavoured cold
drinks
Jug Vend Configuration
enables the selection of drinks available, the number of
cup vends per jug and to enable/disable SureVend
TM
Water Compensation adjust dispensed water quantity
Recipe Scale Factor adjust water levels for all drinks
Disable Selections enables individual selections to be disabled
Token Enabled enables which drinks are available with payment by token
Cup Mechanism Sengs
enables SureVend
TM
, Cup Mechanism and Cup Staon
Sensor features to be turned on or o
Product Configuration Page 3/4 (Section 5.7.17)
Brewer Waste Management enable or disable and to manage brewer waste capacity
Water Filter Management enable or disable and to manage filter service intervals
Bowl Rinse At Home Posion
rinses the bowl with the dispense head in the home (back)
posion
CoEx® Brewer
set the CoEx® cleaning routine, CoEx® module type and
pre-vend heating routine and view CoEx® operaonal data
including failures, counters and water ow rate
Water Only – No Cup
enables hot and cold water to be dispensed without a cup
being dispensed
49