CPI COTI - Page 61

Secon 5 - Engineer’s Program
Technical Manual
System Settings Page 2/4 (Section 5.11.9)
Language
enables individual languages to be set in both programming
and user modes
DTS
Data Transfer Standard, enables the method of data transfer
from the machine to a device to be specified
Screen Brightness
enables the brightness of the screen in both standard and
power save mode to be set
Update Adversements for future development
Software Updates enables configurations to be loaded
Backup/Restore
enables a backup of the current configuration to be made or
restored
Clone Settings
enables the current configuration to be copied to and re-
stored from a USB stick
Custom Configurations pre-programmed configurations can be selected
System Settings page 3/4 (Section 5.11.17)
Software Version displays details of the version currently installed
Temperature Units enables the selection of Celsius or Fahrenheit
Keyless Transitions enables Jug and Free vend via PIN codes
Standby Screen
enables the machine to display a standby screen and to set a
time between the last vend and when the standby screen is
displayed
Default Dispense Head
Position
sets the position of the dispense head after a vend
Automac Reboot Sengs enables the me of reboots to be changed
Buzzer Sengs
changes the sound when touch / capacive screen is inter-
acted with
Debug Log Enable enables the capture of log les for fault analysis
System Settings page 4/4 (Section 5.11.25)
Display OOS Errors if enabled will show the customer the errors
LED Device Type enables the selecon of a LED colour scheme
Main Menu page 2/2
Security Codes (Section 5.12)
enables access to the machine to be restricted, codes for
Engineer & Operator access, & Jug & Free Vend
51