Spider DSA User’s Manual
45
Edit Contour
Different color combinations can be chosen to represent the contour. These color
gradients help in visualizing which section of the test object has the highest and
least deformation.
Figure 263. Edit Contour
Node Lines
The nodes or node lines of the structure deformation can be represented by
drawing the cross line between deformed and undeformed geometry model. This
feature can be turned ON by clicking on the Node Lines button. This helps in
displaying the section of the test structure that has zero deformation.
Figure 264. Animation of a plate without and with Node Lines
Un-deformed Display Mode
To Next Page
Loading...