4.2.1 System Configuration
The configuration information entered here will be reported in the standard SNMP MIB2 for 'sysContact' (OID
1.3.6.1.2.1.1.4), 'sysName' (OID 1.3.6.1.2.1.1.5) and 'sysLocation' (OID 1.3.6.1.2.1.1.6). Remember to click the 'Save'
button after entering the configuration information.
4.2.2 System Information
The system information screen will display the configuration information, the hardware MAC address and version, the
system time, the system "uptime" and the software version and build date.
4.2.3 System IP
Setup the IP configuration, interface and routes.
DHCP Client: Enable the DHCP client by checking this box. If DHCP fails and the configured IP address is zero, DHCP will
retry. If DHCP server does not respond around 35 seconds and the configured IP address is non-zero, DHCP will stop and
the configured IP settings will be used. The DHCP client will announce the configured System Name as hostname to
provide DNS lookup.
To Next Page
Loading...
Need help?
General
