4.7.2.4 Port Statistics
Port: The port number.
LACP Received: The number of LACP packets received on a port.
LACP Transmitted: The number of LACP packets transmitted by a port
Discarded: The number of unknown and illegal packets that have been discarded on a port.
4.8 Loop Protection
Loops sometimes occur in a network due to improper connecting, hardware problem or faulty protocol settings. When
loops are seen in a switched network, they consume switch resources and thus downgrade switch performance. Loop
Protection feature is provided in this switch and can be enabled globally or on a per port basis. Using loop protection
enables the switch to automatically detect loops on a network. Once loops are detected, ports received the loop
protection packet form the switch can be shut down or loopped events can be logged.
In Loop Protection menu, you can select Configuration or Status.
4.8.1 Configuration
To Next Page
Loading...
Need help?
General
