Click the “Add New Entry” button to add a new entry.
Click the “Delete” button to remove a newly-inserted entry or select the checkbox to remove a saved entry during the
next save.
Click the “Save” button to save settings or changes.
Click the “Reset” button to restore changed settings to the default settings.
4.6.1.7.6 SNMPv3 Access Configuration
Configure SNMPv3 access table on this page. The entry index keys are Group Name, Security Model and Security Level.
Group Name: A string identifying the group name that this entry should belong to. The allowed string length is 1 to 32,
and the allowed content is ASCII characters from 0x21 to 0x7E.
Security Model: Indicates the security model that this entry should belong to. Possible security models are:
any: Any security model accepted(v1|v2c|usm).
v1: Reserved for SNMPv1.
v2c: Reserved for SNMPv2c.
usm: User-based Security Model (USM) for SNMPv3.
Security Level: Indicates the security model that this entry should belong to. Possible security models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
Read View Name: The name of the MIB view defining the MIB objects for which this request may request the current
values. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 0x21 to 0x7E.
Write View Name: The name of the MIB view defining the MIB objects for which this request may potentially set new
values. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 0x21 to 0x7E.
To Next Page
Loading...
Need help?
General
